Leaderboard

Sick of my ute being in peices, decided cooler pipes are getting done properly this time. Picked up a set of 3" plazmaclamps to go with the turbosmart 50mm BOVs. Getting the new cooler piping fabbed up later this week. Hopefully turns out kinda like this but 3" not 3.5".

Nope, they're 3k+ depending if you go wideband/O2 or flex.

Not fun! Happened to me a few years back. Someone gave me a reasonable but worn out road bike. I already had a road bike, so I rebuilt it as a flat bar road bike for my wife to use. Gave it a test ride to work and picked up a set of front wheel bearings for the car on the way home, so backpack was heavy as. Picked up a puncture about 5km from home so pulled off the wheel and put in the spare tube. Turned out I'd stripped down and either rebuilt or replaced everything single thing on the bike EXCEPT THE FARKEN HAND PUMP!! I only use CO2 canisters now.

2 days left till I get my license back. Bikes back tyre decides to blow out on the way to work this morning. Good fun walking the next 5kms.

officially ordered mine today along with the 02 wide band sensor.

Very impressive, going to solve alot of headaches.

Cheers keith. I might just have to get a standard fg one, or xr6 if I really have to. Mastars, yeah mate DO NOT try and take it off. Double sided tape around all edges and sh*tloads of black sikaflex all inside the tape. I noticed a bit of my paint had a crack in it coming out from under the spoiler. So before it got any worse I thought id remove spoiler and get paintwork fixed and just reaffix the spoiler. No such bloody luck hey!!! When u try and remove spoiler, the silicone holds on that good, that it peels your paint away with it!!! So trying to get another, as cheaper then trying to repair damage but nowhere in brisbane has got anything apparently. 3 panelbeaters all rekon 7 to 8 hundred to fix. I <3 Bananas that. Just gonna wait and hope suttin comes up. Mastars I would just get something thin and flat to slide in on each end and push the tape outta way and then squirt some silicone in on each end. Def reccomend not removing it mate

New fermenter. Pale ale just went in. Got myself a proper keg setup (fridge, 2 taps, gas, kegs etc) I'm currently putting together. Hopefully it'll all be setup and ready in a week or so when the beer's ready. Was so over the bottling of the brews that I'd not done any for a while - this should be a hell of a lot easier and constant. No more secondary ferment, adding sugars to carbonate etc and no more cleaning bottles. Half hour at each end of the brew instead instead of hours and only a week or so before the beer is on tap instead of a month or longer. The new fermenter will let me brew and dispense under pressure - should let everything be a closed loop from when the yeast is added til when the beer is poured. Beer should be a lot cleaner, clearer and have far less chance of infection or "off" flavours - no more banana beer Have also got a nitrogen bottle and tap coming - proper pub "Guinness" and "Kilkenny" etc will be an awesome option. Have still got the "Beer droid" fermenters - will use them for the "small batch" beers - they do 10l so will go straight from them to a 10l keg to chuck on the taps.