Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 22/05/12 in all areas

  1. No he isn't, but I cannot actually type the word to describe him that comes to mind ... I painted the foon's heatshield black month's ago and guess what impellor ?
    4 points
  2. Did you brake up with Max fly??
    3 points
  3. Yeah small turbo rocks. You think it's good down low now, just wait until you do an E 85 tune. It's a different beast. I sat on mine for ages before going bigger. Lost patience trying to get a 10 from it, but I had no doubt it was achievable. I reckon if I took a sh!t before my 11.005 run I may have got there.
    2 points
  4. If you want a really personal service, you can't go past Clinton from Profile. Top guy, I can't recommend him enough!
    2 points
  5. Well a watered down version is much better than full strength. Nothing worse than full strength..gets on my nerves
    2 points
  6. Just realised I have a new unlimited free movie and tv channel on my bluray player. Never leaving the house again.
    2 points
  7. MAX'S make a good one for mass gain and bulk
    2 points
  8. Yes that was me....probly going to a rub and tug
    2 points
  9. max we dont care I think the guys are just bored
    2 points
  10. Nearly chocked on my dinner reading this.
    2 points
  11. Post away, keen for lulz.
    2 points
  12. IMO it looks much better than standard..hopefully it stays on for awhile! The temperature BS is, well, BS. Unless you're doing track work and bloody racing for quite some time..forget about the "extra heat" apparently it'll make. ....cheers.
    2 points
  13. Fark me, for the sake of a few kws who really gives a fark what color people paint it! The OP asked what we thought, not what the color you use how does it effect performance! I Impellor just answer the questions he asked not give us a lecture. Oh yeah forgot to add, Farking cheers big ears!
    2 points
  14. So I'm going to research thermal dynamics, to decide weather or not to paint my heat shield? You must be one boring *beep* lol...
    2 points
  15. Us? What's with the current signature?
    2 points
  16. Heres the time slip boys
    2 points
  17. 129mph - 817rwkw on Heinrichs dyno
    2 points
  18. thanks mate. The rears are still my ET streets. Have not had a chance to put stockies on yet after Calder. Hopefully car is coming along. Nizpro are doing some tweaks for me. They r good blokes down there, and they do some awesome work. Can't wait to get it back and take it down to the track again.
    1 point
  19. Lol Ant...seen that too. Personally hate Keith, farkin kunt, but The Block would love him because he's strict and tight. Just his attitude and approach to people on there sometimes pisses me off lol Can't say the asian plasterers are bad, but fark me. Funniest thing seeing them rock up to sites haha. One van and 8 will jump out, and still manage to fit all their tools in the back hahahah. Bloody quick too, even have the females of the family working too! LOL Ah k dillz...going to clear or put a shine on it once you've done it again?
    1 point
  20. what the? is this directed at me? or somebody else with the same name?
    1 point
  21. as above clinton hocking - or if you can squeeze the drive head to forced performance tuning in toowoomba. elite automotive also do awesome tunes mate - there is plenty of big horsepower tuners in the area
    1 point
  22. Hahaha I know right?! Like.. If you have that kind of relationship with your car and you call it a hot girls name.. You'r f*cked.. But if you have sex with your car AND call it a dude and refer to it as "him"... Your just plain messed up hahahaha but hey.. Aslong as he's happy I guess lol
    1 point
  23. yup this is what happens at my place every day
    1 point
  24. fly u want me too come over give bacio ;p
    1 point
  25. Crankcase is pressurising... Head gasket? Head cracked? Cylinder cracked? Pcv valve broken? Valve Stem seals leaking?
    1 point
  26. I see some post's have been deleted? they were not that bad, where they?
    1 point
  27. NO NO NO. The factory setup is fine. Removing the existing filter is quite easy with a deep throat 24mm socket from Supercheap ($7) and maybe a 24mm open end can help. If it is clean then just remove the filter and put back without filter. It is not needed in a clean engine. If there is crap in it just replace with a new one. Just make sure you use good sythetic oil. If the line is all coked up then it is the owners fault for putting in crap oil. Its not the factory setup fault. All these aftermarket braide lines are rubbish, a waste of time and money and those that say otherwise just like to spend money for nothing.
    1 point
  28. I can see my car on top the hill :newrussian:
    1 point
  29. 1 point
  30. Dear Friends, I have written a book and am quite proud of the results and, in order to market the publication, I'm asking friends and family to spread the news about this essential read. This book on golf gives the reader valuable playing tips and insider information that I have gained through my 40+ years of experience. Highlights include: Chapter 1) How to Properly Line Up Your Fourth Putt Chapter 2) How to Hit a Maxfli ball from the Rough When You Just Hit a Titleist from the Tee Chapter 3) How to Get More Distance off the Shank Chapter 4) When to Give the Curator the Finger Chapter 5) Proper Excuses for Drinking Beer Before 9:00 a.m Chapter 6) How to Find That Ball That Everyone Else Saw Go in the Water Chapter 7) How to Relax When You Are Hitting Three off the Tee Chapter 8 )How to Relax When You Are Hitting Five off the Tee Chapter 9) When to Suggest Major Swing Corrections to Your Opponent The book also includes some GOLF TERMINOLOGY Ø A Paris Hilton - an expensive hole Ø A Diego Mara donna - a nasty 5 footer Ø A Salman Rushdie - an impossible read Ø A Rock Hudson - thought it was straight, but it wasn't Ø A Cuban - needs one more revolution Ø An Elton John - a big bender that lips the rim Ø An Adolf Hitler - two shots in the bunker Ø A Yasser Arafat - ugly and in the sand Ø A Kate Moss - bit thin Ø A Gerry Adams - playing a Provisional Ø A Rodney King - over- clubbed Ø An O. J. Simpson - got away with it Ø A Princess Grace - should have taken a driver Ø A Princess Di - shouldn't have taken a driver Ø A Ladyboy - looks like an easy hole but all is not what it seems Ø A condom - safe but didn't feel real good Ø A sister-in-law - up there but I know I shouldn't be I have copies in stock but I anticipate a rush so be quick and ensure you don't miss out! Please pass this information to anyone who you feel may benefit from my expertise.....
    1 point
  31. You're gay. Just saying.
    1 point
  32. Agreed,it is a great set up, big LCD TV as well... You should see the other one Clint has been using, fully enclosed, ducted and sound proof.. This thing feels like your in a wind tunnel...
    1 point
  33. If genuine you will know it will fit unless it has been damaged. I see so many specialised parts that do not fit correctly, but have had no experience with aftermarket steel bonnets, but have mates in the body side of things complain at about cheap copie panels that take a lot of work to fit correctly, they believe it would be cheaper in most cases to get genuine and then the labour side would not be as high, but I guess it depends on how fussy you are????
    1 point
  34. To go quicker Dillz. Ex that's *beep*. Your *beep*. *beep*.
    1 point
  35. That is sh*thouse. The cars appeal to pigeons, who are attracted to shinny sh*t. I could wrap a HSV in tin foil and get 100k+ for it.
    1 point
  36. Backwards step is backwards.
    1 point
  37. I fell out of a bouncy castle multiple times :(
    1 point
  38. So is your diff bush offset to the top or bottom? The steel tube should be closer to the top of the cradle
    1 point
  39. ^^ Hater. Learn to drive it, and they aren't anywhere near as bad as you make out.
    1 point
  40. yeah If I had to choose I would go the black ones, those other ones dont look the part, I think some fat 18's and lowered will look good. Dont get chrome! haha
    1 point
  41. Ummmm wiring adaptors for $20ea! Man buy from the states, I paid $3ea for the same thing they are selling here.
    1 point
  42. Gazman, I will let you know how I go! It would be nice if Kev does have some better performing top mounts, it would be easier to install! Might be something I'll ask him and look at down the track.
    1 point
This leaderboard is set to Sydney/GMT+11:00
×
  • Create New...
'