Jump to content

Vertini Drift Rims


camdawgs

Recommended Posts

  • Member
  • Member For: 12y 5m 6d

After some info on thes rims, after contacting local tire joints in Adelaide I have been led to believe the 19" version of these will not clear the brembo brakes on my phoon, where is the 20" will. Unfortunatly I have huge doubts as to whether 20s will fit on my car as it is dumped to all hell ( dont know what springs) and the 19"s only just clear as is ( currently running standard phoon rims, not the twisties or the Dark Argens).

Just wondering what are my options here on getting these rims fitted to my car as I NEED THESE RIMS. :)

they come in the followingg sizes

19x8.5

19.9.5

19x10.5

now unfortunately I have no idea what any of these numbers mean except the first number is the size of the rim!

Is it a bad idea to put spacers on a car that you regularly give a hiding? will it affect any other mechanical aspects of the car. Will tyres for these rims be any different than that of a normal 19" rim?

thanks

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 28d
  • Gender: Male
  • Location: Perth

You would definitely want to test fit. I know vertini McLaren will fit 20 x 8.5 +36 and 20 x 10 +42. Maybe the supplier can take measurements of the McLaren. We got ours from Ozzy Tyres. It would be better to stay with a 9.5 as a 10.5 will rub and be a hasle. 19 would be better than 20s. Just get the tyre shop to order them in a test fit. You may have to run +30 on the front. When they test fit they start with say a +36 and then keep adding spacers until it clears. Then if it doesnt stick out to far or rub , you just take the spacer width away from the offset and that's what you order. EASY.

5 x 114.3 is the bolt pattern

Below is the offsets and sizes availiable.

Size Offset (mm) Weight (lbs) Per Rim ico_ca_flag2.gif

5/114.3 25 -

$348.99

5/112 35 -

$292.99

5/114.3 35 -

$292.99

5/114.3 45 -

$292.99

5/120 35 -

$292.99

5/114.3 20 -

$292.99

5/112 35 -

$309.99

5/114.3 35 -

$309.99

5/120 35 -

$309.99

5/112 35 -

$340.99

5/114.3 35 -

$340.99

5/114.3 30 -

$340.99

5/120 42 -

$340.99

5/112 35 -

$313.99

5/114.3 35 -

$313.99

5/114.3 20 -

$313.99

5/120 35 -

$313.99

Edited by arronm
Link to comment
Share on other sites

  • Member
  • Member For: 12y 5m 6d

wow you just threw alot of numbers at me!!!

very much confused ...

but from what ive taken out of what you said is that I need to order in a set of 19"x 9.5, 5/114.3 35 as a test kit?

by your calculations should these fit on my car? will the spacer affect anythig? im guessing these are not legal

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 28d
  • Gender: Male
  • Location: Perth

Try 19 x 8.5 +35 and 19 x 9.5 +35. The back will fit but the front may touch the caliper. you could run a 3 or 5mm spacer , but they are illegal. Get the tyre shop to get them in for you to try. Try wheelworx. or adelaide tyrepower

Link to comment
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 15y 9m 1d
  • Gender: Male
  • Location: Victoria

no tyre shop will get these rims in just to try...

Buy 19X9 +20 front... then if you need too, shave 5 mm off the offset to make them +25... They will clear Brembos... Run 245/35/19s and the stretch will allow them to fit fine...

Buy 19X9.5 +35 rears... 285/30/19s will be perfect...

Link to comment
Share on other sites

  • Dropping a turd
  • Gold Donating Members
  • Member For: 16y 5m 28d
  • Gender: Male
  • Location: Perth

Dont Ozzy tyres have drift. I was thinking of getting vertini savari and ozzy got then in for me to try. And 5mm is not a shave. A wheel hub is made a certain thickness with the wheel nuts recessed to give a certain cross section to bolt to. Reducing it by 5mm may dramatically reduce the structural strength of the wheel. If a wheel failed it would be an insurance nightmare. And I know as I have been asked by insurance companies to asses wheels before.

Edited by arronm
Link to comment
Share on other sites

  • Member
  • Member For: 12y 5m 6d

I think at the moment wheelworx do not have them in stock in adelaide> and if they do its only in 20". And unfortuntely their is no Ozzytyres in SA.

Im not keen on shaving anythnig on my car!!! I might go down to wheelworx and explaint he situation and see what we can work out!

Link to comment
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 15y 9m 1d
  • Gender: Male
  • Location: Victoria

I checked with vertini... Would be fine to take 5mm off their +20 as they have a very thick wall between hub and nut... I was going to do this before I sold mine

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'