All Activity

morning all, happy Friday 📴

Can you please re-phrase the request in the case my comment isn't that helpful... Essentially the gist with using an aftermarket single-DIN or double-DIN headunit with the OEM system is to do it one of two ways 1. Use one of the "aux input(s)" of the aftermarket unit and take the "aux out" from the OEM unit and connect it (not recommended) 2. Don't use the OEM one at all and just run the audio sources of the aftermarket one. For any installation of a headunit you just run ground/power/accessories-power from the plug in the pedals area that's intended for "mobile phone" physical connections (very old method) to just get the head-unit powered/functional... Then for the audio-output of the headunit you have 3 options: 1. Find the wires for the speakers and run the standard wire output of the headunit straight to the speakers. 2. Run RCA cables from the headunit to an amplifier and then from the amplifier to the speakers. Obviously you can get more complicated from there, depending on what sort of speakers, what amplifiers, etc you end up choosing to use.

Need help to install my new find area has three hardwired can’t find plug sorry please someone help because I will end up doing it easy

morning all, happy Thursday 📳

morning all, happy Wednesday 📶

After driving the car today and then driving the car hard on the acceleration of the line and while cruising the speedo has cut out and then I have pulled over and restarted the car, and it was all good. My next steps seem like I will need to change the rear wheel speed sensors, given that the left one is surprisingly worn out more than what I would have expected for a car that is 18 years old with 140,000km on the clock. Dad had a 2005 December build BF MKI XR6 Turbo and never did we have this issue and that car did 200,000km. Front Left Front Right Rear Left: Looks completely flat on the surface . Rear Right: Still has the inner circle that is a present, compared to the left one, which is completely flat.

Hi y'all just after little please just purchased a btr 4 speed just want to check if this part number is for a turbo or na btr gearbox 3R23-7000-AC Any help would be appreciated so I can get my money back if it's a na box cheers

morning all, happy Tuesday 🔆

morning all, happy Monday 🔅

Just an update on the situation. I have changed fuses, and that did not improve the situation. I've taken the community's advice and I cleaned all four wheel sensors. I'm not sure how to upload images however the front ones had swarf which I cleaned with brake cleaner and that looked fine. I then did the rears and the left rear one looks worn out as I suspected as any time when I would apply accleration I would feel that the rear left was the wheel which was always lagging behind when applying the power down. On the right rear, it had what appears to be normal wear. My next steps will be to replace both rear wheel speed sensors if the problem comes back as I am yet to properly drive the car to the point where I can test the speedo to cut out under overtaking or hard acceleration. Thank you for the advice and help so far and I'll continue to share my findings.

morning all, happy Sunday 🎦

morning all, happy Saturday ⏏️

morning all, happy Friday ⏺️

morning all, happy Thursday ⏹️

morning all, happy Wednesday ⏸️

morning all, happy Tuesday ⏬

morning all, happy Monday 🔽

morning all, happy Sunday ⏫

Replacement Valve body and shift solenoids. https://www.ebay.com/itm/114437819053?_skw=5r55w+valve+body+shift+kitted&epid=1456818319&itmmeta=01JZEJFGVBMEN23C73PYH9H934&hash=item1aa5068aad:g:QmsAAOSw5PlhxDWk&itmprp=enc%3AAQAKAAABAFkggFvd1GGDu0w3yXCmi1cRRB7wN9dI3pKeo%2Bfu5qorJbku5TJXv2QDvrxbkZxLGsyO3ivDBM7H2uZZ1x%2BCV%2B3VmM4q4tCIw9XAocxzRAIl0wPpUoCPJNkLS4gSfyIKhwjTGEZUaWcPrCxdqbvTQ21fFuCXlD8hs9DCzMz8rPnZ2XMolc0C5GUnn7mTJ0of7Z91krcFO9umg3rBrCLNrDKvJaQbbktn0RinTNcTuLA%2B6ylDZBxNJo9KfiUE6EMRfTfjEGu63RcZTsaS0KWpnLgnMhfLrJhVHVrf8u1xiljz7M5rnEhQ6RJ0vQT%2FCS62eA%2BFbd6dq%2Bu8wgbeX72iaQs%3D|tkp%3ABFBM3o6-0vtl

Did you find anything? Apparently theres upgraded valve bodies online that have been rebuild and refurbished. I'm not sure on the 5r55W which is the falcon box apparently, will have to do some more research.

that's for the 55R5E. I believe the one used in falcons was the 55r5W? Not sure if it matters or not but the boxes could also be alot different.

morning all, happy Saturday 🔼

morning all, happy Friday ⏮️

Great that you got it sorted and nice that you have let people know what did it for you.

Have you gotten anywhere with this issue? You might try hosing just certain areas while everything is dry to narrow down where the water is getting in to cause the issue.